Hardware & Accessories

There are 95 products.
Showing 1 - 24 of 95 items
  • BDB-BW - Bass Drum Beater Balancer (x1)
    BDB-BW

    Bass drum beater balancerDimension: 15x15mmInner diameter: 6mm - fits all beaters

  • BDB-F1 - Bass Drum Pedal Beater - Hard Felt
    BDB-F1

    Bass drum pedal beaterhard felt head: diameter 5cm - height 3cmlength: 20cmdiameter: 6mmUniversal beater, can be installed on most of the standard bass drum pedals.

  • BDB-FP - Bass Drum Pedal Beater - Felt Plastic
    BDB-FP

    Bass drum pedal beaterHead: flet and plastic - dimensions 53x42x39mmlength: 16cmdiameter: 6mmUniversal beater, can be installed on most of the standard bass drum pedals.

  • CAHH1 - Closed Hi-Hat Support
    CAHH1

    Closed hi-hat supportTechnical Specifications:- Support tube - length 36cm - diameter 2.22cm (7/8")- Toothed joint articulation

  • CAS1 - Straight Cymbal Arm
    CAS1

    Standard straight cymbal supportTechnical Specifications:- Support tube - length 40cm - diameter 2.22cm (7/8")- Toothed joint articulation- Plastic cymbal sleeve and 8mm M8 threading

  • CBA1 - Standard Cymbal Boom Arm
    CBA1

    Boom arm cymbal supportTechnical Specifications:- Support tube - length 38cm - diameter 2.22cm (7/8")- Toothed joint articulation- Arm: length 36cm - diameter 12.7mm- Plastic cymbal sleeve and 8mm M8 threading

  • CCH1 - Cymbal Arm with Clamp
    CCH1

    Cymbal arm support with clampTechnical Specifications:- Aluminum clamp fitting tubes from 9.5mm up to 30mm diameter- Toothed joint articulation- Arm: length 40cm - diameter 12.7mm- Plastic cymbal sleeve and 8mm M8 threading

  • CCH2 - Cymbal Mini Arm with Clamp
    CCH2

    Cymbal arm support with clampTechnical Specifications:- Aluminum clamp fitting tubes from 9.5mm up to 30mm diameter- Toothed joint articulation- Arm: length 15cm - diameter 12.7mm with memory lock- Plastic cymbal sleeve and 8mm M8 threading

  • CLEC1 - Cymbal Extension Clamp 12.7mm
    CLEC1

    Cymbal arm support with clampTechnical Specifications:- Clamp fitting 12.7mm diameter rods- Length: 31cm- Toothed joint articulation- Arm: length 15cm - diameter 12.7mm- Plastic cymbal sleeve and 8mm M8 threading

  • CLH1 - Hoop Clamp - 8-12mm Rod
    CLH1

    Hoop clampDimension: 38x38mmFits rods from 8 to 12mmFits all kind of hoops up to 40mm height - if necessary, you can change the tension rod to achieve greater height

  • CLR1 - Rotating Clamp
    CLR1

    Multi clampTechnical Specifications:- Aluminum clamp fitting tubes from 9.5mm up to 30mm diameter- Toothed joint articulation- Length: 15.5cm

  • CLR127 - Rotating Clamp 12.7mm Rod
    CLR127

    Clamp fitting 12.7mm rodsTechnical Specifications:- Aluminum clamp fitting tubes from 9.5mm up to 30mm diameter- Toothed joint articulation- Length: 15.5cm

  • CNP8 - M8 Plastic Wing Nut / Screw (x2)
    CNP8

    Wing nut / Tilter for cymbal standM8 - 8mm thread, can be installed on most of the modern cymbal stands.Pack of 2 screws

  • CSK10 - 8mm Cymbal Tilter Extension - 10cm
    CSK10

    Tilter extension for cymbal standAdd another cymbal on your stand using this extension.Adaptable on 8mm threaded cymbal stands, replace the original tilter.

  • CSK15 - 8mm Cymbal Tilter Extension - 15cm
    CSK15

    Tilter extension for cymbal standAdd another cymbal on your stand using this extension.Adaptable on 8mm threaded cymbal stands, replace the original tilter.

  • CSV8-29 - Standard Cymbal Sleeve (x4)
    CSV8-29

    Cymbal sleeve for cymbal stand - protect the cymbale from the threading of the stand and suppress vibrations between the cymbal and the stand- Fits all 8mm stands- Sleeve diameter: 35mm- Total height: 29mm - height above the sleeve: 20mm- Material: plasticPack of 4 cymbal sleeves

  • DK1 - Drum Tuning Key
    DK1

    Drum Tuning KeyTechnical Specifications:-Fits standard square tension rods-Height: 3.8cmWidth: 5cm

  • DKSK - Speed Tuning Drum Key
    DKSK

    Drum Speed Tuning KeyFits standard square tension rodsInstall, remove and tune very easily and quickly your drumheads

  • DTBR1 - Plate with Clamp for Seat Top
    DTBR1

    Spare plate support for drum seatTechnical Specifications:- Dimension: 22 x 20cm- Fit tubes of diameter 2.22cm (7/8")- Hole Spacing (Centre-to-Centre): Inner diagonal holes 130m - outer diagonal holes 222mm

  • DTHE - Pro Drum Throne Leg Base - Double-Braced
    DTHE

    Pro drum seat legsTechnical Specifications:- Spindle diameter: 22mm (7/8")- Double-braced legs- Threaded height adjustment with double locking- Minimum height 35cm- Maximum height 54cm- Total weight : 3.3kg

  • DTHR1 - Pro Round Drum Throne Double-Braced Legs
    DTHR1

    Pro drum seatTechnical Specifications:- Round seat - black vinyl covered - diamètre 35cm thickness 12cm (13 3/4" - 4 1/2")- Double-braced legs- Threaded height adjustment with double locking- Minimum height 50cm- Maximum height 67cm- Big plate with clamp for better robustness and stability- Weight : 6.2kg

  • DTHS1 - Pro Drum Throne Saddle Shaped Double-Braced Legs
    DTHS1

    Pro drum seatTechnical Specifications:- Saddle shaped seat - black vinyl covered - dimensions 43 x 39cm thickness 10cm (17" x 15" - 4")- Double-braced legs- Threaded height adjustment with double locking- Minimum height 48cm- Maximum height 65cm- Big plate with clamp for better robustness and stability- Weight : 6.2kg

  • FLT-C1 - Cymbal Felt Washer 35x15mm (x4)
    FLT-C1

    Replacement felt washer for cymbal standTechnical Specifications:- Outer Diameter: 35mm- Inner Diameter: 12mm- Thickness: 15mm- Color: grey- Pack of 4 units

  • FLT-HHC - Hi-Hat Plate Felt (x2)
    FLT-HHC

    Replacement felt washer for hi-hat stand plateTechnical Specifications:- Outer Diameter: 50mm- Inner Diameter: 10mm- Thickness: 10mm- Color: grey- Pack of 2 units